Login for faster access to the best deals. Click here if you don't have an account.

Production Process and Process

Oct 21st, 2022 at 07:23   Phones & Tablets   Budaun   87 views Reference: QK9b66k9bEv

Location: Budaun

Price: Contact us


Original Title: Production Process and Process Requirements of Customized Wardrobe Hint Traditional finished wardrobes in life bring many inconveniences to home decoration, and also bring many troubles to public life, whirial selection and cutting Generally speaking, the material selection of wardrobe factories is carried out according to thh,ap each part of theousing. The complexity of the plate process is closely related to many factors such as the appearance design of the product, the product structure,bespoken tape measure, the materials used and the number of product varieties on the production line. For the drawer bottom plate, only cutting is needed, while for the honeycomb hollow floor cabinet panel, the processing of a sinfinish installation. B: The processing route of the processing plate (veneer) is as follows: cutting, pressing plate, edge cleaning,mini tape measure, edge sealing, trimming and installation. Because the working procedure of line B is simple, the cutting time of line B is usually 3-4 days later than that of line A, so that the two lines can be matched and packaged. Manufacturing Process Requirements and Tools for Plate Wardrobe 1 Tools required for machine section: Paper press, electronic moving saw, gants of the press: a. Plates shall be glued firmly ? No degumming is allowed. When the plate is inserted, it must be aligned with the two adjacent sides of the framework. After cold pressing, custom tailor tape ,tailor measure tape, the position deviation of the upper and lower plates is less than 1.5cm. b.The color of the holding color should be consistent with the tone of the board surface, and too much color difference is not allowed. (2) Quality requirements for manual installation: the parts must be installed firmly, the board surface shall be kept clean, and no scratch, indentation,bra tape measure, bruise, abrasion and other phenomena are allowed. (3) Packaging quality requirements: a. The products must pass the inspection before they can be packed. ? Components must be placed according to the stacking requirements of the packing list. b. The gummed paper for sealing the box must be pasted firmly ? The packing belt must also be tightened, and the product stacking must conform to the requirements. Don't spend a penny if you are not satisfied with the design! Return to Sohu to see more Responsible Editor:. tape-measure.com